You Don't Need Another Service Visit.
You Need Clarity on Your CNC Plasma System
True Limits
Independent Performance Analysis for CNC Plasma, Oxy-Fuel Systems:
I measure what others assume — so you know where performance is lost and how to recover it.
-
Stop relying on one-sided OEM service.
-
Start making data-driven upgrade decisions.
-
Achieve a true OPEX efficiency perfomance.
Watch Before You Book Audit: Armands Sakne explains the hidden problem: Why your high-end CNC system is likely operating at 50% of its true capacity. Learn how T-Index Diagnostics stops the blame game and empowers your team with facts.
Inability to Operate Efficiently.
_edited.png)
Typical signs I see in factories:
Conical or tapered holes.
Inconsistent angularity on straight cuts.
Operators blamed for quality issues.
Can’t cut the material thickness they were sold for.
Gas or air quality issues.
Machine performance process has slowly lost.
My mission is not to fix your machine. It's to arm you with independent measurable facts - so your supplier fixes the right problem on the first time.
The T-Index: Measuring Performance, Not Promises.
T-Index shows how much of your machine’s potential is actually being use.
It turns assumptions into data, and data into decisions.
Software
Plasma
Infrastructure
Consumables
Operations
Management
Objective Analysis Leads to Clear Outcomes:
Fix with Existing Supplier
Your current system is capable.
It needs fine-tuning and process aligment - not new hardware.
Targeted retrofit of specific component delivers the major gains you're missing
Partial Upgrade
The data confrims a diffrent technology is required for true efficiency.
Wrong Machine Type
Path to Guaranteed Clarity.
Day 1: Training & Process Understanding
Full-day session explains how a modern plasma system is supposed to perform - from thermal cutting tehchology concepts to consumable managment.
Day 2: On-Site Diagnostic & Perfromance Audit
Together we verify what was learned in the theory, observed live cutting behaviour, and collect data needed for the final T-Index Report.
"I give you the map, not the wrench. Once you understand the system, you’ll never be dependent again."
Data Over Names: The Measurable Impact.
Customer Feedback:
Liebherr Container Cranes Ltd.
— Alan, Plasma Cutting Department Foreman
Initial situation:
The plasma cutting system suffered from unstable gas pressure and incorrect nesting software output, producing faulty bevel programs and inconsistent edge geometry.
Intervention:
Through on-site assessment and process review, the client team was guided on how to verify gas stability, identify software-driven bevel inconsistencies, and regain control over the cutting process.
Result:
Production stability improved significantly, and the team gained a clear technical understanding of their system’s limits and optimization steps.
“It was great speaking with you — I have learned a lot from you.”
Stinis Netherlands B.V.
— Wietze, Production Manager
Initial situation:
The combined plasma and oxy-fuel system was operating at only around 50 % capacity due to a poorly engineered gas-supply design that caused performance instability and frequent process interruptions.
Intervention:
During a service provided through Zinser GmbH, full diagnostics and a review of the gas-delivery configuration were performed.
Based on the findings, targeted improvements were implemented by the service team.
Result:
The machine returned to 100 % operation, consistently cutting all maximum thickness ranges with both the Hypertherm XPR300 plasma and the oxy torch.
“We can finally use the full potential of our machine.”
BHS Corrugated Fertigungs, Montage, Service, s.r.o.
— Harald , General Manager
Initial situation:
The plasma cutting system experienced critical performance losses due to gas delivery malfunctions and incorrect nesting parameters.
Intervention:
After on-site diagnostics and review of the software-to-machine integration, the root cause of the instability was identified and corrected in cooperation with the machine OEM service team.
Result:
Cutting performance was fully restored, and the system achieved stable operation under the proper XPR configuration.
“Thank you for your great job.”
Horex Trade d.o.o.
— Robert, General manager
Initial situation:
The machine suffered from hidden and difficult-to-recognize issues in the torch height control and arc-voltage control system.
Intervention:
By applying the T-Index methodology, I was able to identify the core issue and provide a clear diagnostic report that pinpointed the exact source of the problem.
Result:
Customer now possesses precise, measurable data to present to the OEM for proper resolution.
“We have been living with those problems since the installation of the machine.”
General Partners
Your Investment in Independent Clarity.
Pricing is customized based on machine type, process complexity, and the number of systems assessed. We provide a detailed proposal after an initial discovery call. Your investment is designed to be recovered through OPEX savings within months, not years.